METLOG datalogger is a robust, stand-alone, low-power data logger featuring 24-bit A/D convert resolution, digital isolation for each channel, extensive communications capabilities, and on-board barometric pressure and RH/T sensor.
METLOG is used where reliability, flexibility, and compatibility are essential to your success, which allows to add more channles, disrtribute measurments, and measure vibrating wire sensors dynamically. PCIe communication interface enable to repalce various communication modules flexiable.
Key Feature
- New 24-bit A/D convert resolution to
- Digital isolation for all I/O and all sensors’ power supply
- PCIe interface compatibles with varous communication
- On-board barometric pressure and RH/T sensor
| Analog Inputs |
Up to 12 Single-ended of 6 Differential |
| ADC | 24-bit |
| Operating Temperature Range |
-40° to +70°C (standard) |
| Maximum Scan Rate | 1000 Hz |
| Universal Inputs | 6 individually configured inputs for digital functions |
| Pulse Counters | 6 includes 1 High speed Pulse counters |
| Digital I/O | 23 terminals |
| I/O Protection | Digital Isolation for all I/O |
| Sensor Power supply | 12v/1.5A and 5v/1.2A Isolation power supply |
| Communications Ports | Ethernet, USB Micro B, I/O, CPI, 2 x RS-485, 2 x RS-232, TTL,SDI-12 |
| Data Storage Ports | Micro SD |
| Input Limits | ±5 V |
| AnalogVoltage Accuracy |
Accuracy specifications do not include sensor or measurement noise. |
| Power Requirements |
16 to 32 Vdc for charger input (CHG) |
| Real-TimeClockAccuracy | ±3 min. per year (optional GPS correction to ±10 µs) |
| Internet Protocols | Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP (APIPA), IPv4, IPv6, UDP, TCP, TLS (v1.2), DNS, DHCP, SLAAC, Telnet, HTTP(S), SFTP, FTP(S), POP3/TLS, NTP, SMTP/TLS, SNMPv3, I/O IP, MQTT |
| Communication Protocols | CPI, PakBus, SDM, SDI-12, Modbus, TCP, DNP3, UDP, NTCIP, NMEA 0183, I2C, SPI, and others |
| Data Storage |
64 MB DDR II +128MB flash |